Taipei, Friday, Sep 27, 2024, 23:31

Technology Front

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

Published: May 12,2014

26 Read

The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the M24SR series and is based on the M24SR64 device. Two versions of this kit are available: the Standard Edition and the Premium Edition.

More on This

STM Reveals New Antenna-matching RF Integrated Passive Devices for STM32WL MCUs

STMicroelectronics has released nine RF integrated passive devices (RF IPDs) that combine antenna impedance-matching, balun...

STM and Soitec Cooperate on SiC Substrate Manufacturing Technology

TAIPEI, Taiwan – STMicroelectronics (STM) and Soitec (Euronext Paris) announce the next stage of their cooperation on Silicon Carbide (SiC) substrates...

The Premium Edition includes all of the Standard edition features, plus a headset and a Bluetooth module to demonstrate the convenience to pair it with a smartphone via NFC.

The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbits EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz RFID reader or an NFC phone.

The I2C interface uses a two-wire serial interface, consisting of a bidirectional data line and a clock line. It behaves as a slave with respect to the I2C protocol.

The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag.

The board is powered through the USB bus. It also includes a microcontroller STM32F103 to drive the EEPROM via I2C and the LCD screen via SPI bus.

Features:

- M24SR64-Y Dynamic NFC/RFID tag

- 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)

- STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory

- LCD Color Screen (320*200 pixels)

- Different color LEDs

- USB microB connector for board powering

- JTAG connector for microcontroller firmware upgrade and debug

- Joystick for menu selection

- M24SR-DISCO-PREM specific features:

- Bluetooth module with audio outputs connected to Jack 3.5

- Headset

comments powered by Disqus