NANTOU, Taiwan - Standard certification and testing company Allion Labs Inc. formally opened an “IoT Innovation Center” in Zhongxing New Village...
Allion Labs, Inc. (Allion) announced that its Nantou Taiwan Lab now offers Host electrical compliance testing for Thunderbolt 3...
Three years after its initial study there are now ever more wireless products available on the market; hence, our superior experts decided to conduct an extensive study on the most up to date products now available on the market.
For its study it has chosen those with the latest Qi versions and those most capable & presentable: The Ikea NORDMÄRKE (Qi V1.1) followed with the Samsung EP-NG930(Qi V1.2). Its Receiver for this test is the Samsung S7.
Its test would involve Wireless Charging Performance, Wireless Charging Efficiency, Qi Devices Interoperability and User experience.
Wireless Charging Performance
Three years ago a team in Allion performed a test on one of the first generation wireless chargers the MaxWell WP-PD10. Its charging capability was around 600mAh(avg) and took around 3 hours to fully charge a 2000mAh battery.Using a 3000mAh battery of Samsung S7 for a rematch. From the table below we can observe that the updated versions of wireless chargers do perform better. Using the Ikea wireless charger as a comparison we found a 63% difference in the charge current and a 5% increase in charging efficiency.
Allion has also made a comparison between Fast Chargers & normal chargers. It found that the Samsung Fast Charge compared with the Ikea wireless charger produces 52% more charge current (1454mAh(avg.)) and an 18% reduction in charging time. It is obvious that Fast Charge can perform better in terms of charging speed, but an increase from 5V to 9V also raises safety concerns.
When compare Samsung’s conventional wired charging process with the wireless we can obviously see that charging with a wire has its advantages, yet the wireless can still be considered as acceptable.
Wireless Charging Efficiency
To this day there is still no clear set standard in the industry regarding the measurement of efficiency, when Allion conducted these tests we choose Wireless Power Consortium (WPC) as an evaluation standard, due to the fact that they are at this time the major promoters of this category, they are represented as Qi logo, another notable player would be the AirFuel Alliance; however, Allion did not refer to them because they do not have much to offer in terms of products in the market.
WPC advises the formula below as an evaluation standard for efficiency:
Efficiency = battery power / DC in Power
@內文:The formula respectfully, excludes power loss from AC adaptors due to the unbalanced quality of adaptors. Thus at this point the efficiency level for charging would be at around 60%.
Following the extinctive testing & research of the data, Allion has found the chargers in question have all exceed 60% efficiency. Yet when compared with conventional chargers, there is still a 20% difference. Thus the issue in question would be improving efficiency in any future prospects.
Qi Devices Interoperability
The evolution of wireless charging from Qi V 1.0 to Qi V 1.2 is still plagued by interoperability.
WPC in the standard 1.1 Qi has implemented (Foreign Object Detection; FOD). Hence, if the charging platform senses a disturbance caused a foreign object, it would immediately cease any operations. WPC has since updated their standard to Ver. 1.1 and plans to halt sales of all Ver. 1.0 products within a year.
When conducting interoperability testing we referred to WPC QI Interoperability Test SPEC Ver. 1.4 for testing.
Besides the two test targets we have added a new display with wireless charging capabilities. For the receiving end (Rx) we included a Power bank, wireless charging casing and a smartphone. Allion has also enlisted a Qi sniffer to aid in our observation. Below in detail are supporting Qi specifications we used in the three (Rx) and a Transmitting (Tx).
Allion has found the new display with wireless charging capabilities (Qi Ver. 1.2.2) had critical design flaws which caused a cession of energy supply after one minute. Although the product had obtained Qi certification, there are still interoperability issues; thus, it speculate there are still a good proportion of products which have passed Qi, but still have underlying issues relating to interoperability. Therefore, these issues should not be eluded by manufactures in the future.
At Allion understand the numerous conditions & environments its readers encounter daily; such as most people may use casing for their smart phones or some may use a RFID card and an (Oyster / Suica / MetroCard). Hence after it place its phones on the charging platform; would it result in interference while charging? Likewise, if coins or keys were placed on the platform; what would happen?
Besides the above there are some other scenarios that the user may encounter:
• Using DLNA(Wi-Fi) to listen or share music.
• Using DLNA or Air Play to cast images on to the TV.
• Text / Calls / Line Message / Email, etc.
Allion has also observed in some cases reception quality may decrease. For instance if the user placed coins or keys on the platform, the metallic objects would become heated. It would not be hard to imagine what could come of this.
Wireless charging may be a possible trend in the near future, besides phone charging some cars have now been equipped with Qi certified devices on board; thus, safety is now a priority we should look in to, also how to protect the life span of batteries. These and many others are all important aspects developers must look in to in the near future.
The need to compare chargers regarding to their charging time, efficiency, temperature, effective range and interoperability has become a challenge for all developers and producers.
Also interoperability would affect user experience; hence, sufficient product testing and evaluation is needed prior to product release.
This article is from Allion
- 1TSMC: The Second Act
- 2Low Carbon Emission Precious Metals Recycling Solution: Hydrometallurgy Metal Stripping Technology
- 3Embedded Technologies Shape New Industrial Automation Style
- 4Eco-Friendly Recycling Technology Allows for Common Sustainable Economy and Ecology
- 5Substitute Paper is the Main Objective
- 6To Have a Big Win in the Big Data Battlefield
- 7New Numerical Investigation of the Reinforcement Efficiency of Long Carbon Fiber Composites